Shell Tonna Oils S
High performance lubricant for machine tool slideways
Shell Tonna Oils S are specially designed for the lubrication of machine tool slides and tables.They are based on highly refined mineral oils and contain additives to
enhance their tackiness, anti-wear and stick-slip characteristics.
Applications
• Machine tool slideways, tables and feed mechanisms Developed for use on a wide range of materials used for machine tool slideway surfaces, including cast iron and synthetic materials.
• Machine tool hydraulic systems Particularly recommended for machines which have a combined hydraulic and slideway lubrication system.
• Machine tool gearboxes and spindles Also suitable for gear and headstock lubrication.
The lower viscosity grades are intended for horizontal slide lubrication (Tonna S 32, S 68 or S 100). For
vertical slides use Tonna S 220.
Advice on applications not covered in this leaflet may be obtained from your Shell representative.
Performance Features and Benefits
•Excellent frictional properties Specially developed to overcome “stick-slip” problems with slow moving machine tool slides and tables, allowing more accurate positioning.This provides major benefits of improved surface finish and dimensional accuracy of workpieces.
• Advanced technology Developed in conjunction with machine tool manufacturers to meet the requirements of the most advanced machine tools using a wide variety of slideway materials.
• Good slideway adhesion Provides strong adhesion to slideway surfaces,resisting wash-off by metalworking fluids.
• Ready separation from water-extendible cutting fluids Separates readily from water-extendible metalworking oils allowing easy removal by skimming.
• Excellent anti-wear performance Provides high levels of anti-wear protection for slideways, gears, bearings and hydraulic system components.
• Excellent corrosion prevention characteristics Provides effective protection of machine tool surfaces and components in the presence of water-extendible cutting fluids.
Specification and Approvals
Tonna S meets the following specifications:
ISO/DIS 6743-13
DIN 51524 HLP
DIN 51517 CLP
Approved by Cincinnati-Milacron and other machine tool manufacturers
Health and Safety
Guidance on Health and Safety are available on the appropriate Material Safety Data Sheet, which can be obtained from your Shell representative.
Protect the environment Take used oil to an authorised collection point.Do not discharge into drains, soil or water.